At a Glance
- Two industrial strengths: Elchemy lists 35% and 50% hydrogen peroxide. Household 3% and 12% products follow different buying rules.
- Grade follows use: Technical, food, electronic and cosmetic or pharma grades exist. Match the grade to your process before you compare prices.
- Hazard class follows strength: It is an oxidizer and a corrosive. Elchemy’s 50% listing shows UN2014, Class 5.1, subsidiary Class 8, Packing Group II.
- Storage is an engineering job: Producers advise aluminum or stainless steel tanks, continuous venting, containment and no return of unused product.
- Price falls with pack size: Two catalogs showed 45% and 71% lower cost per gallon at 55 gallons than at 5 gallons.
- Decision rule: Fix the strength, grade and pack format first. Then compare quotes on landed cost.
What You’ll Learn
Learn how to choose a strength and grade, plan safe storage, compare landed cost and shortlist a supplier.
Introduction
A quote for hydrogen peroxide in bulk can look cheap and still be the wrong buy. The strength may not suit your process. The grade may lack the papers your auditor expects. The pack may need equipment your site does not have. These problems usually surface after the order is placed.
This guide is for US procurement, plant and facilities teams that buy drums, totes or bulk loads. It covers strengths, grades, specifications, hazards, safe storage, price drivers and supplier checks. If you are new to buying chemicals in bulk, the same discipline applies here.
Retail 3% and 12% bottles are outside its scope. You will also find a decision framework, a catalog price comparison and a six-point RFQ list for your next purchase.
What Counts as Hydrogen Peroxide in Bulk?
Industrial hydrogen peroxide means drums, totes or bulk loads. Orders come with a spec sheet and a lot-specific certificate of analysis (COA). Retail bottles of 3% to 12% are a different market with different packaging and rules.
Hydrogen peroxide is H2O2, CAS 7722-84-1, supplied as a stabilized solution in water. Elchemy’s hydrogen peroxide is listed at 35% and 50% strength.
Concentrations and Grades
Strength sets the hazard class and handling. Grade sets purity limits and the documents you receive. Decide both before you ask for quotes.
The strengths in this guide start at 30%. Elchemy’s product page lists 35% hydrogen peroxide and a 50% product. Its FAQ names technical, food, electronic and cosmetic or pharma grades.
Strength | Typical grade | Typical industrial use | Handling note |
3% to 12% | Household and retail | Cleaning, first aid, laundry | Outside this guide |
30% to 35% | Technical, food-processing | Water treatment, bleaching, process oxidation | Oxidizer and corrosive, so use compatible equipment |
50% | Technical | Industrial processes, often diluted on site | Dilute only with supplier approval |
Technical Grade
Technical grade serves water treatment, bleaching and process oxidation. Elchemy’s guide to water treatment names textiles, pulp and paper, food and beverage, and petrochemical users.
For disinfection, contact time matters. See this comparison of peroxide versus isopropyl alcohol for the trade-offs.
Food Grade
Food grade names a specification for defined uses. It does not mean the product is meant to be eaten. Under 21 CFR 184.1366, hydrogen peroxide is GRAS for listed food uses and must meet the Food Chemicals Codex. The rule sets limits by food, such as 0.05% in milk for cheesemaking, and requires residual removal.
A separate rule, 21 CFR 178.1005, allows solutions up to 35% to sterilize polymeric food-contact surfaces. Residual hydrogen peroxide must not exceed 0.5 ppm in distilled water.
Sellers use “food grade” and “FDA approved” loosely. One catalog labels a 32% product food grade yet says not to use it in food. Ask for the specification and intended use in writing. Qualified regulatory review is required for any food application.
Electronic and Cosmetic or Pharma Grades
Elchemy’s FAQ lists both grades, but the page publishes no specification values for them. Ask for the specification and a lot COA before you qualify either.
Choosing a Concentration
Choose between 35% and 50% on freight, storage space and your dilution plan. A 50% load carries more active product per gallon shipped, but it has to be diluted before many uses. Dilute on site only after your supplier approves a sample of the dilution water.
Specifications and COA Checks
The COA proves the grade. Ask for a lot-specific COA before the first order and compare it with your own limits.
Elchemy tests every shipment for assay, stability, acidity and total carbon or nonvolatile residue. A COA travels with each order. Its 50% listing gives assay as 50.0 to 50.80% w/w and pH as 0.5 to 2.5. The page publishes no limits for the other tests, so request them.
Parameter | What it tells you | Reference value | Ask the supplier for |
Assay | Strength of the solution | 50.0 to 50.80% w/w on Elchemy’s 50% listing | Result for each lot |
Acidity or pH | Acidity of the solution | pH 0.5 to 2.5 on Elchemy’s 50% listing | Result and method |
Stability | Resistance to decomposition | No limit published | Test method and result |
Total carbon or nonvolatile residue | Organic and solids contamination | No limit published | Limit and result |
Appearance | Visual check on receipt | Colorless clear liquid | Typical value |
Hazards and Safety Snapshot
Hydrogen peroxide is both an oxidizer and a corrosive, so storage and protective equipment are engineering decisions.
Elchemy’s 50% listing shows Oxidizer Category 1 (H271) and Corrosive (H314). Its transport entry is UN2014, Class 5.1, subsidiary Class 8, Packing Group II. A 30% technical SDS from another supplier shows the same entry. Classification changes with concentration, so read section 14 of the SDS for each strength.
Wear splash-proof goggles and chemical-resistant gloves and boots. Producers forbid leather gloves and boots, because contact can start a fire. Our guide to SDS requirements explains the sheet format.
Never mix it with other chemicals. The household comparison in bleach vs hydrogen peroxide explains why mixing matters. Qualified safety review is required for your site.
Packaging, Pack Sizes and MOQ
Pack format drives handling equipment, freight and unit cost.
Elchemy’s page names drums, IBCs and bulk supply but lists no pack sizes. US catalogs show 5 gallon pails, 15 and 55 gallon drums, and 275 to 330 gallon IBC totes.
Format | Typical size | Best for | Handling notes |
Pail | 5 gal | Trials and small runs | Manual handling, keep vented as supplied |
Drum | 15 to 55 gal | Steady small to medium use | Drum handling, no wooden pallets |
IBC tote | 275 to 330 gal | Regular production | Pump transfer, containment |
Bulk load | Quote only | Sites with approved tanks | Tank built to producer standard |
Sizes reflect formats listed by US suppliers, so confirm exact sizes with yours. Elchemy’s page says commercial orders typically start from 1 MT and asks buyers to request the exact MOQ. Confirm pack size, stock and lead time in your RFQ.
To test fit against your specification, Request a Sample. The page states that domestic samples dispatch within 24 to 48 hours.
Hydrogen Peroxide Storage and Handling at Bulk Volumes
Use compatible vented containers, keep the product clean and plan containment before the first delivery. North American producers publish a shared storage standard.
Containers and Tank Materials
Elchemy lists vented HDPE, aluminum or stainless steel containers. Producers advise high-purity aluminum or stainless steel grades 304, 304L, 316 or 316L for tanks. Passivate tanks before service. Ask your supplier before you use any other material, following the producers’ storage standard.
Venting, Containment and Monitoring
Hydrogen peroxide releases oxygen slowly, so containers must stay vented. Producers call for a continuous vent and an emergency relief valve on tanks. Run tanks at atmospheric pressure, add level indication and provide containment around them.
Unloading and Transfer
Keep a water source, a safety shower and an eyewash close to the unloading area. Transfer by pump or gravity, never by pressurizing the tank. Never return unused product to the container.
Keep Away From
Keep combustibles away from storage and unloading areas, and do not stand drums on wooden pallets. Elchemy’s listing names iron, copper, zinc, lead, silver, acetone, aldehydes and reducing agents as incompatible. Our note on hazardous chemical safety covers segregation and containment basics.
What Affects Hydrogen Peroxide Price
Price follows strength, grade, pack format, volume, origin and freight. Elchemy quotes bulk orders against your specification.
Cost driver | Effect on price | What to state in your RFQ |
Strength and grade | Tighter specs can raise the quote | Standard, strength and grade |
Pack format and volume | Cost per gallon usually falls as volume rises | Format and annual volume |
Origin and freight | Shifts landed cost and transit time | Destination and Incoterm |
Catalog Price Illustration
Public catalogs show how pack size moves unit price. On 9 November 2026, one 30% technical listing priced a 5 gallon pail at $21.08 per gallon. A 55 gallon drum cost $11.58 per gallon, and a 275 gallon tote cost $8.91.
Source (viewed 9 Nov 2026) | Pack | Price | Per gallon |
Alliance Chemical, 30% technical | 5 gallon pail | $105.40 | $21.08 |
Alliance Chemical, 30% technical | 55 gallon drum | $637.00 | $11.58 |
Alliance Chemical, 30% technical | 275 gallon IBC tote | $2,450.00 | $8.91 |
ChemWorld, 32% listed as food grade | 5 gallons | $259.99 | $52.00 |
ChemWorld, 32% listed as food grade | 55 gallons | $829.99 | $15.09 |
ChemWorld, 32% listed as food grade | 310 gallon tote | $2,999.99 | $9.68 |
The rows are not like-for-like. Strength, grade, supplier type and shipping terms differ. One supplier adds carrier freight at cost, while the other lists free shipping. Treat every figure as an indicative catalog price, not a market quote.
Compare Quotes on Landed Cost
The best price on hydrogen peroxide is the lowest landed cost for the same specification, not the lowest line price. Landed cost adds freight, hazmat handling, duty and unloading to the material price. Keep four things identical when you compare quotes:
- Same strength, grade and standard.
- Same pack format and size.
- Same freight, Incoterm and duty terms.
- Same documents.
Origin changes both freight and duty, as this guide to importing bulk chemicals explains.
To compare a quote against these catalog figures, Request a Quote.
Documents and Compliance
Ask for the TDS, SDS and a lot-specific COA before you commit. Elchemy lists a COA, TDS and GHS-aligned SDS with every order. A packing list, bill of lading, certificate of origin, Halal and Kosher papers are available on request.
Shipping paperwork depends on strength and package. Elchemy’s price factors cite US import duty under HTS 2847.00, so confirm the current rate with your customs broker. Our guide to importing chemicals to USA covers the wider process.
How to Choose a Hydrogen Peroxide Supplier
Supplier type decides support, documents and risk. Decide first whether you need a manufacturer, a distributor or a trader.
Manufacturer, Distributor or Trader
A manufacturer controls production. A hydrogen peroxide distributor sources from several plants and adds documents, logistics and support. A trader buys and resells, so technical support varies. This comparison of manufacturers vs distributors covers the trade-offs.
Where to Find US Producers
US producers and distributors play different roles. Elchemy publishes a role-checked list of US hydrogen peroxide manufacturers, which is not a ranking. Use it to find names, then apply the checklist below.
Supplier Checklist
Use this checklist before you shortlist a supplier. These supplier selection checkpoints go deeper.
- Confirm strength, grade and standard in writing.
- Get the SDS before you commit.
- Request a sample COA before the quote.
- Confirm pack format, MOQ and lead time.
- Confirm freight, duty and delivery terms.
- Confirm hazmat packing and shipping support.
Buying Through Elchemy and Your RFQ
Elchemy supplies hydrogen peroxide as a supplier and distributor, sourcing from partner plants. Its page states a quote reply within 24 to 48 hours. It lists shipping to the USA, UK, UAE and more than 40 countries. US warehouses are in New Jersey, Texas and California. Listed terms include EXW, FOB, CIF and DDP. For the wider case for a distributor, see these specialty chemical distributor benefits.
Before you buy hydrogen peroxide in bulk, send a clear RFQ. Include these six items:
- Strength and grade.
- Per-order and annual volume.
- Pack format and size.
- Destination and delivery terms.
- Documents required.
- Sample request.
Decision Framework for Your Order
The best strength, pack and supplier depend on process, volume and site equipment. Use these rules before you request quotes.
- Choose 35% if your process and storage suit a lower strength and you can take more volume.
- Choose 50% if freight and storage volume dominate cost, and your site can handle it.
- Choose a technical grade for water treatment, bleaching or effluent.
- Choose a higher-purity grade for electronic, cosmetic, pharma or food-contact use, and ask for the specification.
- Choose drums for a few batches a month, and totes or bulk loads if you have unloading equipment and containment.
- Choose a distributor if you want several grades, documents and logistics in one place.
FAQs
Which suppliers sell bulk hydrogen peroxide to manufacturers?
Chemical distributors, ingredient suppliers and producers all sell to manufacturers. Retail sites suit small packs, while distributors supply drums, totes and loads with a COA. Compare each on strength, grade, documents and landed cost. For names, see our US supplier list.
What does food grade hydrogen peroxide mean?
It means the product meets a specification for defined food-processing uses, such as 21 CFR 184.1366. That rule points to the Food Chemicals Codex. It does not mean the product is safe to drink. Concentrated hydrogen peroxide is corrosive, so use it only in qualified industrial processes with the right equipment.
What is the minimum order quantity?
Elchemy’s product page says commercial orders typically start from 1 MT. It asks buyers to request the exact minimum for their grade and pack. Retail sellers sell single pails and drums. State your volume, strength and pack format in your RFQ so the supplier can confirm the minimum.
How is bulk hydrogen peroxide packed and shipped?
Suppliers ship drums, IBC totes or bulk loads, usually as regulated hazardous material. Elchemy’s 50% listing shows UN2014, Class 5.1, subsidiary Class 8, Packing Group II. Larger packs typically move by freight carrier. Confirm hazmat packing, labels and carrier rules with your supplier before the first shipment.
How much does hydrogen peroxide cost per gallon in bulk?
There is no single price. In catalogs viewed on 9 November 2026, two suppliers priced a 5 gallon pail at $21.08 and $52.00 per gallon. A 55 gallon drum was $11.58 and $15.09. Strength, grade, pack size and freight drive the gap, so compare landed cost.
Can I dilute 35% or 50% hydrogen peroxide on site?
Only with care. Producers require the supplier to analyze and approve a sample of your dilution water before bulk storage. Contaminants can trigger decomposition. Use compatible equipment and wear protective gear. Qualified safety review is required for your site, so confirm the plan with your supplier first.
Conclusion
Buying hydrogen peroxide in bulk comes down to three decisions. Pick the strength and grade that fit your process. Plan storage and unloading before the first delivery. Then compare suppliers on the same pack size and delivery terms.
Treat price as the last step. A quote means little until strength, grade, documents and terms match. If you are still testing a process, start with a sample before you order totes.
Share your strength, volume and destination, and Elchemy will quote against your specification. Request a Quote.









