Products
Our Technology
Sustainability & Compliance

Home / Blogs / Flavours & Fragrances / Eucalyptus Oil 80: Uses, Specifications and Bulk Sourcing

Eucalyptus Oil 80: Uses, Specifications and Bulk Sourcing

Authored by
Ankit Singh
Published On
14th Nov 2026
● 10 minutes read
FacebookTwitterLinkedInLinkedIn

At a Glance

  • Meaning: The 80 refers to 1,8-cineole above 80%, reached by rectification. It does not describe oil strength.
  • Standard: ISO 770:2002 covers crude and rectified Eucalyptus globulus oils and names the 70/75 and 80/85 trade types.
  • Floor or band: Some standards treat 80/85 as a floor and others as a range. State which one your spec uses.
  • Documents: Ask for a batch COA with a GC cineole result, plus a TDS and an SDS.
  • Uses: Typical uses span aromatherapy, personal care, air care, home cleaning and pharma. Use levels come from the supplier’s IFRA certificate and your own assessment.
  • Safety: Swallowing the oil is dangerous, especially for children, so storage and labelling matter.

What You’ll Learn

Learn what the 80 grade means, which specifications to request, how use levels are set and how to vet suppliers.

Introduction

Eucalyptus oil 80 is a rectified Eucalyptus globulus oil sold on its 1,8-cineole content. Many listings still read the number as oil strength, which leads to mismatched specifications and rejected lots. The difference decides whether a lot passes incoming inspection.

Retail pages rarely clear it up, because they sell small packs to consumers rather than drums to formulators. Buyers then compare quotes that describe different oils. The cheapest quote may describe a different material from the one you need.

This guide explains what the grade means, which specifications to request and where the oil is used. It also shows how to assess a eucalyptus oil supplier for personal care, home care and pharmaceutical use. Our eucalyptus species guide compares cineole levels across species.

What Eucalyptus Oil 80 Means

In trade, the 80 describes 1,8-cineole, the main constituent of the oil, and not its strength. ISO 770:2002 says the 80% to 85% trade product is oil rectified by distillation to give cineole above 80%. It names a 70% to 75% type on the same basis, above 70%.

The oil is distilled from the leaves of Eucalyptus globulus. Rectification is a second distillation that raises the cineole share. Reference literature adds that it can also remove unwanted aldehydes, such as isovaleraldehyde, from crude medicinal oils.

Pure cineole is sold separately as eucalyptol, which suits buyers who need the single compound. The choosing section below compares the two.

How Standards Treat the 80/85 Grade

Standards do not agree on whether 80/85 is a floor or a band. ISO 770:2002 frames it as cineole above 80%, while older and national standards give 80 to 85%. A lot with a higher result can pass one definition and fail the other.

StandardCoversCineole requirement
ISO 770:2002Crude or rectified E. globulus oilTrade types above 70% and above 80%
ISO 4732:1983Rectified E. globulus oil from PortugalThree types: 70.0 to 74.9%, 75.0 to 79.9% and 80.0 to 85.0%
ISO 3065:1974Australian eucalyptus oil80 to 85%
AS 2113.2-1998Australian oil at 80 to 85% cineole80 to 85%

ANSI lists ISO 4732:1983 as historical, so confirm which edition your supplier means.

Specifications Buyers Should Request

A grade name does not define a lot. Ask for a batch COA that reports 1,8-cineole by gas chromatography, and name the standard on the purchase order. ISO 770:2002 treats its chromatographic profile as normative, so the other components matter as well.

ParameterWhat to ask forWhy it matters
1,8-cineoleGC result, stated as a floor or a bandDefines the grade
Botanical sourceSpecies name, such as Eucalyptus globulusCineole levels differ by species
Chromatographic profileMain components, such as alpha-pinene, limonene and p-cymeneShows whether the oil fits a rectified globulus profile
Appearance, colour and odourDescription on the COAQuick identity check on receipt
Density, refractive index and optical rotationValues at 20 °CPhysical identity tests in ISO 770:2002
Ethanol miscibilityResult in 70% ethanolMatters for alcohol-based products
Shelf life and storageStated on the TDSSupplier terms vary

Documents to Request

Ask for these before the first order. A supplier that cannot produce them cannot back its grade claim. Elchemy’s product page links a TDS and an SDS for this oil, and some bulk listings publish lot-specific GC/MS reports.

  1. A batch COA with the GC cineole result, batch number and test method.
  2. A TDS with shelf life and storage conditions.
  3. An SDS for your destination market.
  4. A statement of botanical name and origin.

Eucalyptus Oil Uses in Industry

Industrial demand is broader than retail pages suggest. Elchemy’s product page lists aromatherapy, pharmaceuticals, personal care, air fresheners, home cleaning, creams, lotions and diffusers, and mentions repellent formulations. Each use brings its own checks on documents and regulation.

UseWhat the buyer checks
Aromatherapy and diffusersOdour profile, GC cineole result and SDS for the destination market
Creams, lotions and personal careINCI name, batch documents and cosmetic rules in the target market
Pharmaceutical productsThe monograph or specification the finished product must meet
Air fresheners and home cleaningOdour consistency between batches and SDS hazard data
Repellent formulationsPest-control rules, which need separate regulatory review

Usage Levels, IFRA and Labelling

Use levels depend on the finished product and the market, not on the oil grade alone. Generic percentages on retail pages do not replace a safety assessment of your formula. Two documents set the practical limits: the supplier’s IFRA certificate and the labelling rules of your target market.

CheckWhat to do
IFRA certificateAsk the supplier for the certificate that matches the material and batch you buy
Product categoryMatch your product to its IFRA category before you choose a use level
INCI nameConfirm the INCI name on the supplier documents, since cosmetic labels depend on it
Safety assessmentHave a qualified assessor confirm the final level in your formula

In the EU, Eucalyptus globulus oil must be named on labels above 0.001% in leave-on and 0.01% in rinse-off cosmetics. The Cosmile Europe entry explains the rule. New products must comply from 31 July 2026, and existing products by 31 July 2028.

Choosing Between Eucalyptus Oil 80/85, 70/75 and Eucalyptol

Choose the grade from your spec floor, not from a general idea of quality. A higher cineole figure is not automatically better for every formula. Match the grade to what your customer, monograph or finished-product specification requires.

  • Choose 80/85 if your spec asks for cineole above 80%, or your customer names the grade.
  • Choose 70/75 if your spec floor is 70%. The IPCS poisons monograph notes that medicinal eucalyptus oil is specified at not less than 70% cineole.
  • Choose eucalyptol if you need the single compound rather than a whole oil. Elchemy’s eucalyptol page lists CAS 470-82-6 with fragrance, flavour, oral care and pharmaceutical uses.
  • Choose to test two grades if your spec is not fixed. Run both against your own method before committing to volume.

If you already know your floor, Request a Quote with the grade and standard.

Eucalyptus Oil Bulk Sourcing: Supplier, Distributor or Manufacturer

Buying bulk eucalyptus oil means deciding who stands behind the lot. A producer controls distillation, a distributor holds stock from several sources, and a sourcing partner arranges supply against your spec. Each can work if the documents match the lot.

Rectification is a separate redistillation step, so ask whether the seller distils, rectifies or blends the oil. Any eucalyptus oil manufacturer or trader should answer that directly. Our guide on distributor versus manufacturer explains who carries quality responsibility.

Put these questions to every supplier:

  1. Which species and country of origin does the lot come from?
  2. Is the cineole figure a floor or a band, and how is it measured?
  3. Which standard does the COA reference?
  4. Who distils and who rectifies the oil?
  5. What pack sizes, container types and minimum order apply?
  6. Can I test a sample before the bulk order?

Use our supplier approval checklist to score the answers. If purity is the concern, our essential oil purity checklist covers checks for buyers.

To test the oil against your spec first, Request a Sample. Elchemy’s product page mentions domestic samples, so ask about terms for other countries.

Safety, Storage and Regulatory Checks

Eucalyptus oil is hazardous if swallowed, and the risk is highest for children. The IPCS poisons monograph reports severe poisoning in children after 4 to 5 mL and recommends no oral paediatric dose. Treat bulk stock as a hazardous material and follow the SDS.

Elchemy’s SDS for this oil carries the signal word Danger. It lists a flammable liquid in category 3, skin sensitisation in category 1 and an aspiration hazard in category 1. Classification can differ between suppliers, so read the SDS for the lot you buy.

The same SDS advises keeping the product cool, in a well-ventilated place and away from ignition sources. The IPCS monograph adds storage at or below 25 °C in full containers, protected from light. It also suggests child-resistant containers for liquid products.

Regulatory status depends on the use and the market. Food, cosmetic and pharmaceutical uses each need review by a qualified regulatory adviser, and pest-control claims follow separate rules.

FAQs

1. What is the CAS number for eucalyptus oil?

Elchemy’s product page lists CAS 8000-48-4 for eucalyptus oil. Pure eucalyptol, the single compound 1,8-cineole, has a different number, 470-82-6, on Elchemy’s eucalyptol page. Use the number on your COA, and check whether the document describes an oil or an isolated compound.

2. Which HS code applies?

Elchemy’s product page lists HS code 33012942 for this oil. Customs classification depends on the importing country and the exact description of the goods. Confirm the code with your customs broker before booking freight, and keep it consistent across the invoice, COA and SDS.

3. Why do listings show different cineole ranges for similar oils?

Listings often mix purity claims with cineole ranges, but a purity claim does not state the cineole level. A range can describe a floor or a band. Only a batch GC result shows the figure, so request it in writing against the grade you ordered.

4. Can this grade come from species other than E. globulus?

Trade oils can come from other cineole-rich species, but ISO 770:2002 covers Eucalyptus globulus only. Cineole levels differ by species, so the COA and your specification must name the same one. Name the species on your purchase order, and compare the main types in Elchemy’s species guide.

5. Can I use it in food or flavourings?

Not by default, because food status depends on the destination market, the exact material and the intended use. Elchemy’s SDS lists the oil as a flavour and fragrance ingredient for manufacturing use only. Get qualified regulatory review before you formulate, and do not assume a cosmetic grade suits food.

6. What use level is right for soap, candles or lotions?

There is no single figure that suits every soap, candle or lotion. Use levels come from the supplier’s IFRA certificate and your own safety assessment. Retail rules of thumb may not match your material, so request the certificate for your product category.

7. What shelf life and storage should I expect?

Shelf life is set by each supplier’s TDS and varies. Ask for it in writing, with the storage conditions it assumes, and compare it across quotes. The IPCS monograph advises keeping product at or below 25 °C in full containers, protected from light.

8. Should I test a delivered lot independently?

For critical uses, yes, and for any new supplier. Compare the supplier COA with an independent GC result for cineole and the main profile components. Keep retained samples from each lot, and agree the test method in the contract so disputes rest on data.

Conclusion

Eucalyptus oil 80 is best bought on cineole, standard and batch evidence, not on the number alone. Decide whether your spec is a floor or a band, and name the standard. Ask every supplier for a batch COA, a TDS and an SDS.

Test a sample against your own method before you commit to volume. Safety and regulatory checks depend on the use and the market, so involve qualified reviewers before the first order. To start, Request a Quote with your cineole floor, the standard and the volume you need.

Related Reading

Potassium Citrate in Beverages: Why U.S. Drink Brands Are Using This Ingredient9 minutes read

Potassium Citrate in Beverages: Why U.S. Drink Brands Are Using This Ingredient

Ankit Singh

•

19th Jun 2026

 Is Canola Oil Banned in Europe? Truth, Myths & EU Regulations9 minutes read

 Is Canola Oil Banned in Europe? Truth, Myths & EU Regulations

Ankit Singh

•

20th Apr 2026

What Is Citral? A Formulator’s Guide to This Common Fragrance Ingredient in Skincare9 minutes read

What Is Citral? A Formulator’s Guide to This Common Fragrance Ingredient in Skincare

Ankit Singh

•

23rd Mar 2026

Patchouli Oil Aromatherapy: Benefits, Blends and Why the US Market Cannot Get Enough of It7 minutes read

Patchouli Oil Aromatherapy: Benefits, Blends and Why the US Market Cannot Get Enough of It

Ankit Singh

•

13th Mar 2026

Understanding Neroli and Orange Blossom: Therapeutic Uses and Differences8 minutes read

Understanding Neroli and Orange Blossom: Therapeutic Uses and Differences

Ankit Singh

•

23rd Feb 2026

Is Naphthalene Aromatic? Explaining the Science of Aromatic Compounds7 minutes read

Is Naphthalene Aromatic? Explaining the Science of Aromatic Compounds

Ankit Singh

•

18th Feb 2026

Benzene and Naphthalene Compared: Properties and Uses in the Aroma Industry6 minutes read

Benzene and Naphthalene Compared: Properties and Uses in the Aroma Industry

Ankit Singh

•

14th Feb 2026

Olive Oil vs Jojoba Oil: Benefits and Applications in the Fragrance Industry8 minutes read

Olive Oil vs Jojoba Oil: Benefits and Applications in the Fragrance Industry

Ankit Singh

•

3rd Feb 2026

Comparing Lavender and Rosemary Oils: Aromatherapy, Haircare & Cosmetic Uses9 minutes read

Comparing Lavender and Rosemary Oils: Aromatherapy, Haircare & Cosmetic Uses

Ankit Singh

•

16th Dec 2025

The Role of Lavender Oil in Personal Care: Aromatherapy, Skincare & Haircare9 minutes read

The Role of Lavender Oil in Personal Care: Aromatherapy, Skincare & Haircare

Ankit Singh

•

13th Dec 2025

Elchemy logo is your high-trust gateway to the Indian chemical manufacturers. We offer best payment terms, seasoned chemical consultants, fastest turnaround times, and minimum supply chain risks.